Revolver Cygnis Gold

Cu modelul de succes Cygnis, brandul britanic Revolver Audio s-a pozitionat in intreaga lume ca fiind unul dintre proiectantii majori de incinte audio high-end.

Dupa acest succes, Revolver Audio a decis sa proiecteze cel mai sofisticat sistem de boxe high-end construit pana in prezent de catre firma britanica. Modelul de referinta poarta numele Cygnis Gold si este rezultatul cercetarii si testarii cu echipamente de ultima generatie.

La proiectarea acestor boxe speciale s-a tinut cont doar de rezultatul final, boxele fiind proiectate si executate fara nici un compromis. Rezultatul este un sunet de referinta, plin de stil distinctiv.

Designul incintei acustice este unul special, ce ofera performante audiofile maxime. Solutia cea mai buna a fost considerata realizarea boxelor cu 3 cai pentru a acoperi perfect toata latime de banda perceptibila de catre urechea umana.

Cel mai bun mod de abordare a acestei probleme a fost proiectarea boxelor cu doua incinte acustice independente, pentru a asigura reducerea denaturarii aparute ca urmare a concurentei dintre unitatile de sunet. Aceasta solutie a dus la cresterea neutralitatii boxei si la rezultatul final de exceptie.

• Designed and manufactured in England
• 25Hz - 30kHz +/-6dB (35Hz - 28kHz +/-3dB)
• SENSITIVITY 92dBW 1m/1w                                                                                                                                                   
• NOMINAL IMPEDANCE 8 Ohms (minimum 5.1 Ohms)
• CROSSOVER Full 3 way crossover, acoustically isolated in dedicated box.
• Hand built with laminated and air cored inductors, polypropylene capacitors and silver plated OFC wiring.
• FRECVENTA CROSSOVER Tw - Mid 3250Hz, Mid - Bass 300Hz
• TWEETER 29mm Centre and Edge damped Polyester soft Dome, Low resonant frequency with Rear cavity damping, Exceptionally flat frequency response to 38Khz.
• MIDRANGE 165mm woven glass fibre diaphragm with vented cast chassis and shielded double magnet, 15 litre enclosure of advanced composite material with Kapex foam core, with a high gloss piano black finish Asymmetrically shaped to reduce standing waves.
• BASS 417mm Honeycomb 2 x layer Kevlar diaphragm with vented cast chassis with double magnet motor system, Extensively braced, acoustically isolated 117 litre enclosure with QB3 port reflex loading, 2pi driver position for more accurate LF ‘in room’ performance.